SXGA+ Series OLED-XL™ Microdisplays
The SXGA OLED-XL active matrix OLED provides the best compbination of high resolution and low power requirement available in any technology. It offers digital signal processing in an extremely compact package (0.77 inch diagonal active area) requiring less than 200mW under typical operation. The new SXGA microdisplays provide versatility and flexibility for OEM developers though an FPGA driver design available on a separate, lower power driver board, or as source code for integration into end product electronics for maximum power efficiency. The supported video formats are SXGA, 720p, DVGA (through 1280 x 960 pixel doubling), and both frame sequential and field sequential stereovision. Additional enhancements include increased pixel uniformity, improved color gamut, on-chip temperature sensor and compensation for luminance and gamma correction, and 30-bit digital RGB input. The 1280 x 1024 triad pixel array comprises triads of vertical sub-pixels stacked side by side to make up each 12 x 12µm color pixel. The various display modes and timing options are selected by means of registers that are programmed through the serial port or controlled through the FPGA. On-board circuitry ensures consistent color and brightness over a wide range of operating temperatures. Additional flexibility is provided for electronic image centering and preventing fixed-pattern burn-in with the ability to adjust the full image positioning by up to 12 pixels both horizontally and vertically. Proven in military, commercial, and consumer systems, eMagin’s portfolio of OLED microdisplays deliver high-resolution, flicker-free virtual images, working effectively even in extreme temperatures and high-vibration conditions that stymie legacy technologies.
» View or download a pdf of the SXGA+ OLED-XL Data Sheet
features
- 1280 (x 3) x 1024 pixels microdisplay
- Color (filtered) or white and green monochrome
- Versatile driver FPGA
- 30-bit digital R,G,B input
- 2-wire serial interface
- 12 x 12 µm color pixel (Stripe)
- 5:4 image aspect ratio
- 19.6 mm (0.77") image diagonal
- Low power consumption: Nominal 200 mW (full motion video)
- Improved pixel uniformity
- Integrated temperature sensor
- Instant on at low temperature; no heaters required
- No clearing at high temperature
- High commercial/military ruggedness
operating characteristics
- Color Pixel Aspect Ratio: Square
- Color Pixel Pitch: 12 µm
- Color Pixel Arrangement: R, G, B Vertical Stripe
- Viewing Area: 15.36 mm x 12.29 mm
- Mechanical Envelope: 22.9 mm x 16.4 mm x 4.79 mm
- Color Gamut: > 75% of NTSC gamut
- Gray Levels: 256
- Uniformity: > 90% (Area uniformity as per VESA FPDM Standard)
- Uniformity: > 95% (Pixel to pixel uniformity)
- Contrast Ratio: > 10000:1 Intrinsic (Dark Ambient)
- Front Luminance (Maximum)
Color: 400 cd/m 2
White: 1800 cd/ m 2
Green: 3000 cd/ m 2 - Temperature:
Operating: -45°C to +70°C
Storage: -55°C to +90°C - Humidity: 90% RH non-condensing
video inputs
- 30-bit digital R, G, B Inputs
- Video Signal Bandwidth: 135 MHz maximum
- Control & Serial Interface: I2C
- Frame Rate: 30 to 85 Hz
power interface
- Power Supply (Vdd): 2.5 VDC logic, 5 VDC analog/display
- Total Power Dissipation:
200 mW typical
500 mW peak (25°C, 60Hz, All pixels on)
To request a quotation, contact:
CUSTOMER SUPPORT & SALES
tel: 425.284.5200 (west coast) //
845.838.7904 (east coast)
fax:
425.284.5201 (west coast) //
845.838.7903 (east coast)
email: customersupport@emagin.com or sales@emagin.com